For the PXIe-5622, calibrates the frequency response of the device. The VI is called multiple times, one for each frequency point in the sweep. The user must supply the stimulus frequency in hertz and stimulus amplitude in volts of the input signal.


icon

Inputs/Outputs

  • civrn.png instrument handle —

    instrument handle is the instrument handle that you obtain from niScope Cal Start. The handle identifies a particular instrument session.

  • cstr.png channels —

    channels specifies the channel(s) to calibrate. For more information, refer to Channel String Syntax.

  • cdbl.png range (V) —

    range (V) is the vertical range to calibrate.

  • cdbl.png stimulus amplitude —

    stimulus amplitude is the amplitude of the external stimulus applied to the digitizer. For valid values, refer to the calibration procedure document for the device.

  • cerrcodeclst.png error in —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • cdbl.png stimulus frequency —

    stimulus frequency is the external stimulus applied to the digitizer.

  • iivrn.png instrument handle out —

    instrument handle out has the same value as the instrument handle.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.