ScopeWarning Properties
- Updated2023-09-06
- 4 minute(s) read
ScopeWarning Properties
The ScopeWarning type exposes the following members.
Properties
| Name | Description | |
|---|---|---|
  | AdcOverload |
Gets the warning code when one or more channels has an ADC overload.
|
| AutoSetupNoSignal |
Gets the warning code when auto Setup was unable to find a signal.
|
| ChannelOverload |
Gets the warning code when the 50 ohm protection on one or more channels has been disabled because of excess signal power.
|
| Code |
Gets the GUID code assigned to the warning.
|
| DataOverflow |
Gets the warning code when an Onboard Signal Processing feature has caused the input data to overflow outside the valid vertical range.
|
| ErrorQueryNotSupportedWarningCode |
Gets the warning code when Error Query is not supported.
|
| HeaterCircuitTemperature |
Gets the warning code when onboard temperature stabilization circuit requires calibration.
|
| InvalidData |
Gets the warning code when data acquired during the acquisition is possibly invalid.
|
| InvalidWaveformElement |
Gets the warning code when one of the elements in the waveform array is invalid.
|
| P2POverflow |
Gets the warning code when one or more peer-to-peer endpoints has overflowed.
|
| PllUnlocked |
Gets the warning code when the PLL is not locked.
|
| PllUnlockedAndAdcOverload |
Gets the warning code when the PLL is not locked and the ADC has an overload.
|
| Text |
Gets the message related to the warning.
|
| TimestampRollOver |
Gets the warning code when the timestamp counter has rolled over.
|
| UnexpectedDriverWarningCode |
Gets the warning code for an unexpected driver warning.
|