ScopeTrigger Properties

Gets the ScopeAdvanceTrigger sub-object.

Gets the ScopeArmReferenceTrigger sub-object.

Gets or sets how the digitizer couples the trigger source.

Gets the ScopeEdgeTrigger sub-object.

Gets or sets the adjustable period of time between records that allows for fetching data from the digitizer during a multi-record acquisition.

Gets or sets the input impedance, in Ohms, for the external analog trigger channel.

Gets the ScopeGlitchTrigger sub-object.

Gets or sets the length of time, in seconds, the digitizer waits after detecting a trigger before enabling the trigger subsystem to detect another trigger.

Gets whether the acquisition was auto triggered.

Gets or sets the voltage threshold, in volts, for the trigger subsystem.

Configures an instrument to automatically complete an acquisition if a trigger has not been received.

Gets the ScopeReferenceTrigger sub-object.

Gets the ScopeRuntTrigger sub-object.

Gets or sets the source the digitizer monitors for the trigger event. Trigger sources vary for each digitizer model.

Gets or sets the length of time, in seconds, you want the digitizer to wait after it starts acquiring data until the digitizer enables the trigger system to detect a Reference Stop trigger.

Gets the ScopeStartTrigger sub-object.

Gets or sets whether the digitizer should record the trigger position precisely using time-digital conversion (TDC).

Gets the ScopeTVTrigger sub-object.

Get or sets the type of the trigger in use.

Gets the ScopeWidthTrigger sub-object.