ScopeExportedSignals Properties
- Updated2023-09-06
- 4 minute(s) read
ScopeExportedSignals Properties
The ScopeExportedSignals type exposes the following members.
Properties
| Name | Description | |
|---|---|---|
 | AdvanceTriggerOutputTerminal |
Gets or sets the destination terminal to which advanceTrigger is exported.
|
| AdvanceTriggerTerminalName |
Specifies the terminal name for the output trigger signal of the Advance Trigger. When the Advance Trigger is received, the digitizer begins acquiring samples for the Nth record.
|
| EndOfAcquisitionEventOutputTerminal |
Gets or sets the destination for the end of acquisition event.
|
| EndOfAcquisitionEventTerminalName |
Specifies the terminal name for the End of Acquisition Event. When this event is asserted, the digitizer has completed sampling for all records.
|
| EndOfRecordEventOutputTerminal |
Gets or sets the destination for the end of record event.
|
| EndOfRecordEventTerminalName |
Specifies the terminal name for the End of Record Event. When this event is asserted, the digitizer has completed sampling for the current record.
|
| FiveVoltOutputTerminal |
Gets or sets the destination for the exported 5 Volt signal.
|
| ReadyForAdvanceEventOutputTerminal |
Gets or sets the destination for the Ready for Advance trigger event. When this event is asserted, the digitizer is ready to receive an advance trigger.
|
| ReadyForAdvanceEventTerminalName |
Specifies the terminal name for the Ready for Advance Event. When this event is asserted, the digitizer is ready to receive an advance trigger.
|
| ReadyForReferenceEventOutputTerminal |
Gets or sets the destination for the Ready for Reference trigger event. When this event is asserted, the digitizer is ready to receive a reference trigger.
|
| ReadyForReferenceEventTerminalName |
Specifies the terminal name for the Ready for Reference Event. When this event is asserted, the digitizer is ready to receive a reference trigger.
|
| ReadyForStartEventOutputTerminal |
Gets or sets the destination for the Ready for Start trigger event. When this event is asserted, the digitizer is ready to receive a start trigger.
|
| ReadyForStartEventTerminalName |
Specifies the terminal name for the Ready for Start Event. When this event is asserted, the digitizer is ready to receive a start trigger.
|
| ReferenceClockOutputTerminal |
Gets or sets the output terminal to which the reference clock is exported. |
| ReferenceTriggerOutputTerminal |
Gets or sets the destination to which the reference (Stop) trigger is exported.
|
| ReferenceTriggerTerminalName |
Specifies the terminal name for the output trigger signal of the Reference Trigger.
|
| SampleClockOutputTerminal |
Gets or sets the sample clock for the specified terminal.
|
| StartTriggerOutputTerminal |
Gets or sets the destination to which the start trigger is exported.
|
| StartTriggerTerminalName |
Specifies the terminal name for the output trigger signal of the Start Trigger. When the Start Trigger is received, the digitizer begins acquiring samples.
|