ScopeChannelDdc Properties
- Updated2023-09-06
- 2 minute(s) read
ScopeChannelDdc Properties
The ScopeChannelDdc type exposes the following members.
Properties
| Name | Description | |
|---|---|---|
 | CenterFrequency |
Gets or sets the frequency, in hetrz, at which the DDC block frequency translates the input data. This frequency is the region of the spectrum that you want to downconvert to baseband.
|
| Enabled |
Gets or sets whether the digital down converter (DDC) block of the digitizer is enabled.
|
| FrequencyTranslationEnabled |
Gets or sets whether the frequency translation of the data around the selected center frequency down to baseband is enabled.
|
| FrequencyTranslationPhaseI |
Gets or sets the I oscillator phase in degrees at the first point acquired.
|
| FrequencyTranslationPhaseQ |
Gets or sets the Q oscillator phase in degrees at the first point acquired.
|
| QSource |
Gets or sets the channel that is the input to the Q data stream of the digital downconverter (DDC).
|