niRFSG Select Arb Waveform VI

niRFSG Select Arb Waveform VI

Specifies the waveform that is generated upon a call to the niRFSG Initiate VI when the generation mode input of the niRFSG Configure Generation Mode VI is set to Arb Waveform. You must specify a waveform name in the name input if you have written multiple waveforms. The NI-RFSG device must be in the Configuration state before you call this VI.

Supported Devices: PXIe-5644/5645/5646, PXI-5670/5671, PXIe-5672/5673/5673E, PXIe-5820/5830/5831/5832/5840/5841/5842

Related Topics

Assigning Properties or Attributes to a Waveform

Examples

	instrument handle identifies your instrument session. instrument handle is obtained from either the niRFSG Initialize VI or the niRFSG Initialize With Options VI.
	name specifies the name of the stored waveform to generate. This string is case-insensitive and alphanumeric, and it cannot use reserved words.
	error in describes error conditions that occur before this node runs. This input provides standard error in functionality.
	instrument handle out passes a reference to your instrument session to the next VI. instrument handle out is obtained from the niRFSG Initialize VI or the niRFSG Initialize With Options VI.
	error out contains error information. This output provides standard error out functionality.

Examples

Refer to the RFSG Multiple Arbitrary Waveforms VI in the labview\examples\instr\niRFSG directory for an example of using the niRFSG Select Arb Waveform VI.