niRFSG 5611 Adjust LO Filter Calibration VI
- Updated2024-05-08
- 2 minute(s) read
niRFSG 5611 Adjust LO Filter Calibration VI
Calculates calibration information pertaining to the LO filter DAC. This information is based on user-supplied measurements. The calibration information is stored in driver session, and you can later write this information to the device.
Supported Devices: PXIe-5611, PXIe-5673/5673E
 |
instrument handle identifies your instrument calibration session. instrument handle is obtained from the niRFSG Initialize External Calibration VI. |
 |
measured LO OUT power specifies the power measured at the frequency indicated by the frequency to measure output of the niRFSG 5611 Configure LO Gain Calibration VI. |
 |
error in describes error conditions that occur before this node runs. This input provides standard error in functionality. |
 |
instrument handle out passes a reference to your instrument session to the next VI. |
 |
LO filter calibration complete indicates whether the LO filter calibration is complete. |
 |
error out contains error information. This output provides standard error out functionality. |