NIRFSG_ATTR_PULSE_MODULATION_MODE
- Updated2024-05-08
- 1 minute(s) read
NIRFSG_ATTR_PULSE_MODULATION_MODE
Specific Attribute
| Numeric Value | Data type |
Access | Applies to | Coercion | High Level Functions |
|---|---|---|---|---|---|
| 1150190 | ViInt32 | R/W | N/A | None | None |
Description
PXIe-5654/5654 with PXIe-5696: Specifies the pulse modulation mode to use.
PXIe-5842: This property allows you to choose a tradeoff between switching speed and On/Off Ratio when using pulse modulation. Refer to the product specifications document for the switching characteristics of each mode. This property is settable while the device is generating, but some output pulses may be dropped.
Defined Values:
| NIRFSG_VAL_OPTIMAL_MATCH | Provides for a more optimal power output match for the device during the off cycle of the pulse mode operation. Not supported on PXIe-5842 |
| NIRFSG_VAL_PULSE_MODULATION_ANALOG_HIGH_ISOLATION | Allows for the best on/off power ratio of the pulsed signal. |
| NIRFSG_VAL_PULSE_MODULATION_ANALOG | Analog switch blanking. Balance between switching speed and on/off power ratio of the pulsed signal. |
| NIRFSG_VAL_PULSE_MODULATION_DIGITAL | Digital only modulation. Provides the best on/off switching speed of the pulsed signal at the cost of signal isolation. |
Default Value: NIRFSG_VAL_PULSE_MODULATION_ANALOG
Supported Devices: PXIe-5842/5654/5654 with PXIe-5696