Clocking:PXI Chassis Clk10 Source Property
- Updated2024-05-08
- 1 minute(s) read
Clocking:PXI Chassis Clk10 Source Property
Short Name: PXI Chassis Clk10 Source
Property of niRFSA
Specifies the signal to drive the 10 MHz Reference Clock on the PXI backplane. This option can be configured only when the PXI-5600 is installed in Slot 2 of the PXI chassis.
Default Value: N/A
Supported Devices: PXI-5600 (external digitizer mode), PXI-5661
Related Topics
| None ("None") |
The device does not drive the PXI 10 MHz backplane Reference Clock. |
| OnboardClock ("OnboardClock") |
The device drives the PXI 10 MHz backplane Reference Clock with the PXI-5600 onboard clock. You must connect the 10 MHz OUT connector to the PXI 10 MHz I/O connector on the PXI-5600 front panel to use this option. |
| RefIn ("RefIn") |
The device drives the PXI 10 MHz backplane Reference Clock with the reference source attached to the PXI-5600 REF IN connector. You must connect the 10 MHz OUT connector to the PXI 10 MHz I/O on the PXI-5600 front panel to use this option. |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | niRFSA Configure PXI Chassis Clk10 |
| Channel-based | No |
| Resettable | Yes |