Signal Path:Advanced:Notch Filter Enabled Property
- Updated2024-05-08
- 1 minute(s) read
Signal Path:Advanced:Notch Filter Enabled Property
Short Name: Notch Filter Enabled
Property of niRFSA
Specifies whether the notch filter is enabled on the RF conditioning module.
 |
Note The PXI-5661, and PXIe-5663/5663E/5665 only support setting this property to Disabled. |
Default Value: Disabled
Supported Devices: PXI-5661, PXIe-5663/5663E/5665/5667, PXIe-5693
| Disabled (3400) |
Disables the notch filter. |
| Enabled when in Signal Path (3401) |
The notch filter is automatically enabled when it is in the signal path and automatically disabled when it is not in the signal path. |
| Enabled (3402) |
Enables the notch filter. If the notch filter is not in the signal path or if the notch filter is not supported on the device, NI-RFSA returns an error. Select Enable when in Signal Path whenever possible to avoid an error. |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | N/A |
| Channel-based | No |
| Resettable | Yes |