Factory Calibration:NI 5665/5668R:LO2 Attenuation Property
- Updated2024-05-08
- 1 minute(s) read
Factory Calibration:NI 5665/5668R:LO2 Attenuation Property
Short Name: LO2 Attenuation
Property of niRFSA
Specifies the LO2 attenuation, in decibels, during a calibration session. This property is valid only during a calibration session.
Valid and Default Values:
| Device | Valid Values | Default Value |
|---|---|---|
| PXIe-5603/5605 | 0 to 15.5 | 15.5 |
| PXIe-5606 | 0 to 31 | 31 |
Supported Devices: PXIe-5603/5605/5606
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | N/A |
| Channel-based | No |
| Resettable | Yes |