De-embedding:Type Property
- Updated2024-05-08
- 1 minute(s) read
De-embedding:Type Property
Short Name: De-embedding Type
Property of niRFSA
Specifies the type of de-embedding to apply to measurements on the specified port. Use the Active Channel property to specify the name of the port to configure for de-embedding.
PXIe-5830/5832/5840/5841/5842—The only valid value for this property is Scalar or None.
PXIe-5831—Valid values for this property are Vector, Scalar, or None. Vector is only supported for TRX Ports in a Semiconductor Test System (STS).
If you set this property to Scalar or Vector, NI-RFSA adjusts the instrument settings and the returned data to remove the effects of the external network between the instrument and the DUT.
Default Value: Scalar
Supported Devices: PXIe-5830/5831/5832/5840/5841/5842
| None (3900) |
De-embedding is not applied to the measurement. |
| Scalar (3901) |
De-embeds the measurement using only the gain term. |
| Vector (3902) |
De-embeds the measurement using the gain term and the reflection term. |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | N/A |
| Channel-based | Yes |
| Resettable | Yes |