NIRFSA_ATTR_PXI_CHASSIS_CLK10_SOURCE
- Updated2024-05-08
- 1 minute(s) read
NIRFSA_ATTR_PXI_CHASSIS_CLK10_SOURCE
Specific Attribute
| Data type |
Access | High Level Functions |
|---|---|---|
| ViString | R/W | niRFSA_ConfigurePXIChassisClk10 |
Description
Specifies the signal to drive the 10 MHz Reference Clock on the PXI backplane. This option can be configured only when the PXI-5600 is installed in Slot 2 of the PXI chassis.
Defined Values:| NIRFSA_VAL_NONE_STR ("None") | The device does not drive the PXI 10 MHz backplane Reference Clock. |
| NIRFSA_VAL_ONBOARD_CLOCK_STR ("OnboardClock") | The device drives the PXI 10 MHz backplane Reference Clock with the PXI-5600 onboard clock. You must connect the 10 MHz OUT connector to the PXI 10 MHz I/O connector on the PXI-5600 front panel to use this option. |
| NIRFSA_VAL_REF_IN_STR ("RefIn") | The device drives the PXI 10 MHz backplane Reference Clock with the reference source attached to the PXI-5600 FREQ REF IN connector. You must connect the 10 MHz OUT connector to the PXI 10 MHz I/O connector on the PXI-5600 front panel to use this option. |
Default Value: N/A
Supported Devices: PXI-5600 (external digitizer mode), PXI-5661
Related Topics