NIRFSA_ATTR_CAL_IF_ATTENUATION_TABLE_SELECTION
- Updated2024-05-08
- 1 minute(s) read
NIRFSA_ATTR_CAL_IF_ATTENUATION_TABLE_SELECTION
Specific Attribute
| Data type |
Access | High Level Functions |
|---|---|---|
| ViInt32 | R/W | None |
Description
Specifies the IF attenuation table to be used for external calibration. This attribute is valid only in a calibration session.
Defined Values:
| NIRFSA_VAL_EXT_CAL_IF_ATTENUATION_TABLE_STANDARD (2900) | Specifies that the standard IF attenuation table is used for the external calibration. |
| NIRFSA_VAL_EXT_CAL_IF_ATTENUATION_TABLE_ACPR (2901) | Specifies that the adjacent channel power ratio (ACPR) IF attenuation table is used for the external calibration. You can only select this value if you set the NIRFSA_ATTR_CAL_IF_FILTER_SELECTION attribute to NIRFSA_VAL_EXT_CAL_IF_FILTER_PATH_1 or NIRFSA_VAL_EXT_CAL_IF_FILTER_PATH_2. |
Default Value: NIRFSA_VAL_EXT_CAL_IF_ATTENUATION_TABLE_STANDARD
Supported Devices: PXIe-5603/5605