niRFSA_CalAdjustIFResponseCalibration
- Updated2024-05-08
- 1 minute(s) read
niRFSA_CalAdjustIFResponseCalibration
ViStatus niRFSA_CalAdjustIFResponseCalibration(ViSession vi, ViConstString channelList, ViInt32 IFFilter, ViReal64 RFFrequency, ViReal64 bandWidth, ViInt32 numberOfMeasurements, ViReal64* measurements);
Purpose
Specifies the IF response settings.
Supported Devices: PXIe-5601, PXIe-5694
Parameters
| Input | ||||||||||
| Name | Type | Description | ||||||||
| vi | ViSession | Identifies your instrument session. vi is obtained from the niRFSA_InitExtCal function and identifies a particular instrument session. | ||||||||
| channelList | ViConstString | Identifies which channels to apply settings. Specify an empty string as the value of this parameter. | ||||||||
| IFFilter | ViInt32 | Specifies the IF filter used by the downconverter.
|
||||||||
| RFFrequency | ViReal64 | Specifies the RF frequency, in Hz, used during the IF response adjustment. | ||||||||
| bandWidth | ViReal64 | Specifies the bandwidth, in Hz, to use for the IF response adjustment. | ||||||||
| numberOfMeasurements | ViInt32 | Specifies the number of measurements to make. | ||||||||
| measurements | ViReal64* | Specifies the relevant measurements taken for each IF filter configuration, in dB. | ||||||||
Return Value
| Name | Type | Description | ||||||||
| status | ViStatus | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an NI-RFSA function to determine if an error has occurred. To obtain a text description of the status code and additional information about the error condition, call the niRFSA_GetError function. To clear the error information from NI-RFSA, call the niRFSA_ClearError function. The general meaning of the status code is as follows:
|
||||||||