NI-RFPM Fetch S-parameter Measurements VI
- Updated2023-12-28
- 7 minute(s) read
NI-RFPM Fetch S-parameter Measurements VI
Installed With: NI-RFPMFetches all S-parameter measurement results from the last completed measurement.
NI-RFPM Fetch S-Parameter Measurements Double
Fetches all double-precision floating point S-parameter measurement results from the last completed measurement, along with frequency points and port powers.
 |
instrument handle identifies your instrument session. instrument handle is obtained from the NI-RFPM Init With Resources VI and identifies a particular instrument session. |
||||||
 |
format specifies the format in which to fetch the data.
|
||||||
 |
The error in cluster can accept error information wired from VIs previously called. Use this information to decide if any functionality should be bypassed in the event of errors from other VIs. Right-click the error in control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error.
|
||||||
 |
Timeout specifies the time to wait for the operation to complete before returning an error, expressed in seconds. |
||||||
 |
instrument handle out passes a reference to your instrument session to the next VI. instrument handle out is obtained from the NI-RFPM Init With Resources VI and identifies a particular instrument session. |
||||||
 |
data returns the measurement data as a 3-D complex data array with a 2-D array of S-parameters per measurement point. To index this 3-D complex data array: the first index is for the measurement point in the sweep, the second index is for the response port, and the third index is for the stimulus port. |
||||||
 |
frequency returns a 1-D double array of frequencies for each measurement point, in Hz. |
||||||
 |
power returns a 2-D double array of port powers for each measurement point in dBm. The first index is for the measurement point in the sweep, and the second index is for the port. |
||||||
 |
The error out cluster passes error or warning information out of a VI to be used by other VIs. Use this information to decide if any functionality should be bypassed in the event of errors from other VIs.
|
NI-RFPM Fetch S-Parameter Measurements Complex
Fetches all complex double-precision floating point S-parameter measurement results from the last completed measurement, along with frequency points and port powers.
|
instrument handle identifies your instrument session. instrument handle is obtained from the NI-RFPM Init With Resources VI and identifies a particular instrument session. |
||||||
|
format specifies the format in which to fetch the data, which is coefficient.
|
||||||
|
The error in cluster can accept error information wired from VIs previously called. Use this information to decide if any functionality should be bypassed in the event of errors from other VIs. Right-click the error in control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error.
|
||||||
|
Timeout specifies the time to wait for the operation to complete before returning an error, expressed in seconds. |
||||||
|
instrument handle out passes a reference to your instrument session to the next VI. instrument handle out is obtained from the NI-RFPM Init With Resources VI and identifies a particular instrument session. |
||||||
|
data returns the measurement data as a 3-D complex data array with a 2-D array of S-parameters per measurement point. To index this 3-D complex data array: the first index is for the measurement point in the sweep, the second index is for the response port, and the third index is for the stimulus port. |
||||||
|
frequency returns a 1-D double array of frequencies for each measurement point, in Hz. |
||||||
|
power returns a 2-D double array of port powers for each measurement point in dBm. The first index is for the measurement point in the sweep, and the second index is for the port. |
||||||
|
The error out cluster passes error or warning information out of a VI to be used by other VIs. Use this information to decide if any functionality should be bypassed in the event of errors from other VIs.
|