Configuration
- Updated2023-12-28
- 1 minute(s) read
Configuration
Owning Palette: NI-RFPM VIsInstalled With: NI-RFPM
Use the NI-RFPM Configuration VIs to configure operations with your STS device.
| Palette Object | Description |
|---|---|
| NI-RFPM Configure Deembedding |
Configures de-embedding for the specified port by providing an S-parameter (S2P) file of the network to de-embed. |
| NI-RFPM Load Sweep Settings |
Loads a sweep settings configuration file into memory so that measurements are performed according to the sweeps defined in the file. |
| NI-RFPM Property Node |
Gets (reads) or sets (writes) NI-RFPM properties. When you read a property, NI-RFPM analyzes the current configuration to return the coerced value for that property. Setting a property may transition the session to the Configuration state. |
| NI-RFPM Read Sweep Settings Information |
Returns the number of ports and number of points associated with a sweep setting. |
| NI-RFPM Read Sweep Settings Names |
Returns an array of the sweep names defined in the currently-loaded sweep settings files. |
| NI-RFPM Create Reference Level Port Extension S-parameter Table (S2P file) |
Creates an S-parameter reference level port extension table for the port based on the specified S2P file. This VI does not support the RF subsystem. |
| NI-RFPM Select Reference Level Port Extension Table |
Selects the reference level port extension table to apply to measurements made with the port. This VI does not support the RF subsystem. |
| NI-RFPM Delete Reference Level Port Extension Table |
Deletes the selected reference level port extension table for a given port. This VI does not support the RF subsystem. |
| NI-RFPM Delete All Reference Level Port Extension Tables |
Deletes all configured reference level port extension tables for the session. This VI does not support the RF subsystem. |