RfpmUserCalibrationReceiverOffset Properties
- Updated2023-12-28
- 2 minute(s) read
RfpmUserCalibrationReceiverOffset Properties
The RfpmUserCalibrationReceiverOffset type exposes the following members.
Properties
Name | Description | |
---|---|---|
![]() | DigitalGain |
Gets the digital gain.
This property does not support the mmWave subsystem. |
![]() | Offset |
Gets the receiver offset.
This property does not support the mmWave subsystem. |
![]() | RfsaReferenceLevel |
Gets the actual reference level which must be applied to the NI-RFSA/NI-RFmx driver in order
to guarantee that the receiver hardware is in a valid, calibrated state.
This property does not support the mmWave subsystem. |
![]() | SwitchPath |
Gets the path to the switch that the offset applies to.
This property does not support the mmWave subsystem. |