Write Named Waveform (WDT)
- Updated2023-02-17
- 2 minute(s) read
Write Named Waveform (WDT)
Writes the waveform to onboard memory as waveform data type data.
Inputs/Outputs
waveform name
The name of the waveform to configure position.
You should name waveforms using this node under either of the following conditions:
- You are using scripts.
- You want to download multiple waveforms into the hardware.
session in
Instrument session obtained from the Initialize Acquisition Sessionnode, the Initialize Generation Sessionnode, or the Initialize External Calibrationnode.
error in
Error conditions that occur before this node runs.
The node responds to this input according to standard error behavior.
Default value: No error
data
Parameter that provides a waveform to generate.
This input accepts the following data types:
- Waveform
- 1D array of 8-bit unsigned integers
- 1D array of 16-bit unsigned integers
- 1D array of 32-bit unsigned integers
use rate from waveform
A Boolean that specifies how the sample rate is computed.
| True | The sample rate from the WDT value is computed. |
| False | The sample rate from the WDT value is not computed. |
If the sample rate has been configured using the Configure Sample Clocknode, use rate from waveform overrides the sample rate.
Default value: False
session out
Handle that identifies the session in all subsequent node calls.
The session out parameter is obtained from the Initialize Acquisition Sessionnode or the Initialize Generation Sessionnode.
error out
Error information.
The node produces this output according to standard error behavior.