Configure Trigger
- Updated2023-02-17
- 3 minute(s) read
Configure Trigger
Configures the specified trigger.
Use the Configuration nodes to configure triggers, voltage levels, initial and idle states, data position, generation mode, and other properties for your generation operation.
Configures the Advance trigger for digital edge triggering. This node is valid only for acquisition sessions.
Configures the Reference trigger for digital edge triggering.
Configures the Script trigger for digital edge triggering. This node is valid only for generation sessions.
Configures the Start trigger for digital edge triggering.
Configures the Stop trigger for digital edge triggering. This node is valid only for generation sessions.
Configures the Pause trigger as a level trigger.
Configures a Script trigger for level triggering. This node is valid only for generation sessions.
Configures the Advance trigger for multi-sample pattern match triggering.
Configures the Advance trigger for multi-sample pattern match triggering.
Configures the Reference trigger for multi-sample pattern match triggering.
Configures the Reference trigger for multi-sample pattern match triggering.
Configures the Start trigger for multi-sample pattern match triggering.
Configures the Start trigger for multi-sample pattern match triggering.
Configures the Advance trigger for pattern match triggering. This node is valid only for acquisition sessions.
Configures the Advance trigger for pattern match triggering. This node is valid only for acquisition sessions.
Configures the Pause trigger for pattern match triggering. This node is valid only for acquisition sessions.
Configures the Pause trigger for pattern match triggering. This node is valid only for acquisition sessions.
Configures the Reference trigger for pattern match triggering. If the Reference trigger asserts before the required number of pretrigger samples are acquired, it is ignored. This node is valid only for acquisition sessions.
Configures the Reference trigger for pattern match triggering.
Configures the Start trigger for pattern match triggering. This node is valid only for acquisition sessions.
Configures the Start trigger for pattern match triggering. This node is valid only for acquisition sessions.
Configures the Advance trigger for software triggering. Use the Send Software Edge Triggernode to assert the trigger condition. This node is valid only for acquisition sessions.
Configures the Reference trigger for software triggering.
Configures the Script trigger for software triggering. Use the Send Software Edge Triggernode to assert the trigger condition.
Configures the Start trigger for software triggering. Use the Send Software Edge Triggernode to assert the trigger condition.
Configures the Stop trigger for software triggering. Use the Send Software Edge Triggernode to assert the trigger condition. This node is valid only for generation sessions.
Configures the acquisition to not use an Advance trigger. This node is necessary only if you have configured an Advance trigger and now want to disable it.
Configures the data operation to have no Pause trigger. Using this node is necessary only if you configured the Pause trigger and now want to disable it.
Configures the acquisition to have no Reference trigger. This node is necessary only if you have configured a Reference trigger and now want to disable it.
Disables a Script trigger. This node is necessary only if you have configured a Script trigger and now want to disable it.
Configures the instrument to not wait for a Start trigger after the Initiatenode is used.
Configures the instrument to not wait for a Stop trigger after the Initiatenode is used.