Configure Calibration Channel State
- Updated2023-02-17
- 2 minute(s) read
Configure Calibration Channel State
Configures the internal routing of the channel so that you can perform specific calibration steps.
Inputs/Outputs
session in
Instrument session obtained from the Initialize Acquisition Sessionnode, the Initialize Generation Sessionnode, or the Initialize External Calibrationnode.
channel
The specified channels on which to modify the internal routing.
calibration reference
Parameter that specifies which internal routing path to configure based on the calibration type.
Refer to the calibration procedure document for your device for the correct value to use.
calibration type
The section of the external calibration procedure you are trying to execute.
Refer to the calibration procedure document for your device for the correct value to use.
error in
Error conditions that occur before this node runs.
The node responds to this input according to standard error behavior.
Default value: No error
session out
Session handle that passes a reference to your calibration session to the next node.
error out
Error information.
The node produces this output according to standard error behavior.