NIFGEN_ATTR_P2P_ENDPOINT_FULLNESS_START_TRIGGER_LEVEL
- Updated2023-02-21
- 1 minute(s) read
Specific Attribute
| Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1150410 | ViInt32 | R/W | Channel | Yes | None |
Description
Specifies the number of samples the endpoint needs to receive before the signal generator starts generation. This attribute only applies when the NIFGEN_ATTR_START_TRIGGER_TYPE attribute is set to NIFGEN_VAL_P2P_ENDPOINT_FULLNESS. Refer to the Flow Control topic in the NI Signal Generators Help for more information about peer-to-peer operations. This attribute is coerced down to 8-byte boundaries.
 |
Note Due to an additional internal FIFO in the signal generator, the writer peer actually must write 2,304 bytes more than the quantity of data specified by this attribute to satisfy the trigger level. |