NIFGEN_ATTR_OSP_MODE
- Updated2023-02-21
- 1 minute(s) read
Specific Attribute
| Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1150370 | ViInt32 | R/W | N/A | None | None |
Description
Specifies the generation mode of the OSP, which determines the type of data contained in the output signal.
For more information about the OSP modes your device supports, refer to the Devices section of the NI Signal Generators Help.
Defined Values
| NIFGEN_VAL_OSP_IF | The OSP block generates intermediate frequency (IF) data. |
| NIFGEN_VAL_OSP_BASEBAND | The OSP block generates baseband data. |
 |
Note When using the NI 5450/5451 with I/Q rates higher than 200 MS/s, NI-FGEN restricts this attribute value to NIFGEN_VAL_OSP_BASEBAND. |