niFgen_RouteSignalOut
- Updated2023-02-21
- 3 minute(s) read
ViStatus niFgen_RouteSignalOut (ViSession vi, ViConstString channelName, ViInt32 routeSignalFrom, ViInt32 routeSignalTo);
Purpose
Routes various signals in the signal generator to the RTSI lines and front panel terminals.
 |
Notes The signal generator must not be in the Generating state when you call this function. |
| You can clear a previously routed signal by routing NIFGEN_VAL_NONE to the destination terminal. |
Parameters
| Input | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Name | Type | Description | ||||||||||||||||||||||||||||||||||||||||||||||||
| vi | ViSession | Identifies your instrument session. vi is obtained from the niFgen_init, niFgen_InitWithOptions, or niFgen_InitializeWithChannels functions and identifies a particular instrument session. | ||||||||||||||||||||||||||||||||||||||||||||||||
| channelName | ViConstString | Specifies the channel name for which you want to route a signal.
Default Value: "0" |
||||||||||||||||||||||||||||||||||||||||||||||||
| routeSignalFrom | ViInt32 | Various signals can be routed out the RTSI lines.
Defined Values
|
||||||||||||||||||||||||||||||||||||||||||||||||
| routeSignalTo | ViInt32 | The possible RTSI lines to which you can route a signal.
Defined Values
|
||||||||||||||||||||||||||||||||||||||||||||||||
Return Value
| Name | Type | Description | ||||||||
| status | ViStatus | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. You can examine the status code from each call to an NI-FGEN function to determine if an error occurred.
To obtain a text description of the status code, call the niFgen_error_message function. To obtain additional information about the error condition, call the niFgen_GetError function. To clear the error information from NI-FGEN, call the niFgen_ClearError function. The general meaning of the status code is as follows:
|