External Calibration Nodes
- Updated2023-05-15
- 1 minute(s) read
External Calibration Nodes
Use the NI-FGEN external calibration nodes to perform external calibration when following the calibration procedure for your waveform generator model.
Use the NI-FGEN calibration nodes to calibrate NI waveform generators. Different waveform generator models use different calibration nodes. Refer to your waveform generator calibration procedure for more information.
Use the NI-FGEN ADC control nodes only when following the calibration procedure of the waveform generator.
Use the NI-FGEN analog output nodes only when following the calibration DC gain and offset portion of the waveform generator calibration procedure.
Closes an external calibration session and, if specified, stores the new calibration constants and calibration data, such as time and temperature, in the onboard EEPROM.
Use the NI-FGEN external calibration utility nodes to get information about previous calibrations, store information, or password protect the external calibration data on your board.
Use the NI-FGEN flatness control nodes only when following the flatness calibration section of the waveform generator calibration procedure.
Creates and initializes a special NI-FGEN external calibration session.
Use the NI-FGEN VCXO control nodes only when following the oscillator frequency calibration portion of the waveform generator calibration procedure.