Configures triggers.

niDigital Disable Start Trigger VI
Disables a previously configured Start trigger. The digital pattern instrument does not wait for a Start trigger after you call the niDigital Initiate VI or the niDigital Burst Pattern VI before bursting a pattern.
niDigital Configure Digital Edge Start Trigger VI
Configures the Start trigger for digital edge triggering. The digital pattern instrument responds to the trigger on a physical PXI chassis backplane trigger line and waits for this trigger after you call the niDigital Initiate VI or the niDigital Burst Pattern VI. The pattern does not burst until it receives this trigger.
niDigital Configure Software Edge Start Trigger VI
Configures the Start trigger for software triggering. The digital pattern instrument waits for this trigger after you call the niDigital Initiate VI or the niDigital Burst Pattern VI, and does not burst a pattern until it receives this trigger. Use the niDigital Send Software Edge Trigger VI to send the software trigger to the digital pattern instrument.
niDigital Configure First Failure History RAM Trigger VI
Configures History RAM to acquire pattern information starting from the first failed cycle encountered. Depending on the cycles History RAM is configured to acquire, samples may include passing and failing cycles.
niDigital Configure Pattern Label History RAM Trigger VI
Configures History RAM to acquire pattern information starting from a specified label. The trigger can be offset by an additional number of vectors and then by a number of cycles.
niDigital Configure Cycle Number History RAM Trigger VI
Configures History RAM to acquire pattern information starting from a specified cycle number.
niDigital Disable Conditional Jump Trigger VI
Disables the conditional jump trigger instance and releases the existing route for the trigger.
niDigital Configure Digital Edge Conditional Jump Trigger VI
Configures the conditional jump trigger instance to trigger on an incoming digital edge and routes the specified signal source to the instrument.
niDigital Configure Software Edge Conditional Jump Trigger VI
Configures the conditional jump trigger instance to trigger on a software function call.
niDigital Disable RIO Trigger VI
Disables the conditional RIO instance and releases the existing route for the trigger.
niDigital Configure Digital Edge RIO Trigger VI
Configures the RIO trigger instance to trigger on an incoming digital edge and routes the specified signal source to the instrument.

Parent topic: Trigger

NI-Digital Pattern Driver LabVIEW VI Reference