DigitalSourceWaveforms.CreateSerial Method (String, String, SourceDataMapping, UInt32, BitOrder)

public void CreateSerial(
	string pinSetString,
	string waveformName,
	SourceDataMapping dataMapping,
	uint sampleWidth,
	BitOrder bitOrder
)

Public Sub CreateSerial ( 
	pinSetString As String,
	waveformName As String,
	dataMapping As SourceDataMapping,
	sampleWidth As UInteger,
	bitOrder As BitOrder
)

Parameters

pinSetString

Type: SystemString
The set of pins or channels for which to create the waveform. The pins or channels represented by the pinSetString must match the source pins in the pattern that references the waveform. The pin order in the pin set string determines the bit positions of the data written using one of the write waveform methods on the DigitalSourceWaveforms object.

waveformName

Type: SystemString
The name of the waveform to use in the pattern file. Waveform names must be unique. Use the waveformName with source_start opcode in your pattern.

dataMapping

Type: NationalInstruments.ModularInstruments.NIDigitalSourceDataMapping
Specifies whether the the waveform is broadcast to all sites or a unique waveform is sourced per site.

sampleWidth

Type: SystemUInt32
The width in bits of each serial sample. Valid values are between 1 and 32.

bitOrder

Type: NationalInstruments.ModularInstruments.NIDigitalBitOrder
The bit order significance. This can be most significant bit first or least significant bit first. MostSignificantBitFirst is the default value.

You cannot reconfigure settings after waveforms are created.

Reference