DigitalHistoryRam Properties
- Updated2023-11-24
- 2 minute(s) read
DigitalHistoryRam Properties
The DigitalHistoryRam type exposes the following members.
Properties
| Name | Description | |
|---|---|---|
 | BufferSizePerSite |
Gets or sets the size, in samples, of the in-memory History RAM buffer. You can use this property when the instrument is configured for continuous History RAM acquisition.
|
| CyclesToAcquire |
Gets or sets which cycles History RAM acquires after the trigger conditions are met. If you configure History RAM to acquire only failed samples, you must set the pretrigger samples for History RAM to 0.
|
| MaximumSamplesToAcquirePerSite |
Gets or sets the maximum number of History RAM samples to acquire per site. If the property is set to -1, it will acquire until the History RAM buffer is full.
|
| NumberOfSamplesIsFinite |
Gets or sets whether the instrument acquires a finite number of History RAM samples or acquires samples continuously. When the instrument acquires samples continuously, you can fetch samples during the pattern burst.
|