NIDigital.ApplyLevelsAndTiming Method (String, String, String, String, String, String)

public void ApplyLevelsAndTiming(
	string siteList,
	string levelsSheet,
	string timingSheet,
	string initialStateHighPins,
	string initialStateLowPins,
	string initialStateTristatePins
)

Public Sub ApplyLevelsAndTiming ( 
	siteList As String,
	levelsSheet As String,
	timingSheet As String,
	initialStateHighPins As String,
	initialStateLowPins As String,
	initialStateTristatePins As String
)

Parameters

siteList

Type: SystemString
A comma-delimited list of strings of the form siteN, where N is the site number. Passing an empty string specifies all sites.

levelsSheet

Type: SystemString
The name of the levels sheet to apply. Use the name of the sheet or pass the absolute file path used in the LoadLevels(String) method. The name of the levels sheet is the file name without the directory and the file extension.

timingSheet

Type: SystemString
The name of the timing sheet to apply. Use the name of the sheet or pass the absolute file path that you used in the LoadTiming(String) method. The name of the timing sheet is the file name without the directory and file extension.

initialStateHighPins

Type: SystemString
Comma-delimited list of pins, pin groups, or channels to initialize to a high state.

initialStateLowPins

Type: SystemString
Comma-delimited list of pins, pin groups, or channels to initialize to a low state.

initialStateTristatePins

Type: SystemString
Comma-delimited list of pins, pin groups, or channels to initialize to a non-drive state.

Reference