Specifies the behavior of the Source Complete event.

Note NI-DCPower uses the terms "source" and "output". However, while sinking with electronic loads and SMUs these correspond to "sinking" and "input", respectively.
Note This property is not supported by all devices. Refer to Supported Properties by Device for information about supported devices.

Default Value :Refer to Supported Properties by Device for the default value by device.

Note To specify a channel name when accessing this property, you must first initialize the session using the Initialize With Independent Channels VI.

Remarks

The following table lists the characteristics of this property.

Short Name Source Complete Event Pulse Polarity
Data type ci32.png
Permissions Read/Write
High-level VIs N/A
Channel-based No
Instrument-based No
Resettable No
Active High 1018

A high pulse occurs when the event is generated. The exported signal is low level both before and after the event is generated.
Active Low 1019

A low pulse occurs when the event is generated. The exported signal is high level both before and after the event is generated.