Specifies the input terminal for the Shutdown trigger. This property is used only when the Shutdown Trigger Type property is set to Digital Edge .

Note This property is not supported by all devices. Refer to Supported Properties by Device for information about supported devices.

You can specify any valid input terminal for this property, and the driver will create a route between it and the Shutdown Trigger terminal at Commit. Valid terminals are listed in Measurement & Automation Explorer under the Device Routes tab.

Specify the input terminal using the form /Dev1/Engine0/PXI_Trig0 , where Dev1 is the instrument, Engine0 is channel 0, and PXI_Trig0 is the terminal. The input terminal can also be a terminal from another instrument. For example, you can set the input terminal on Dev1 to be /Dev2/Engine0/SourceCompleteEvent .

Note You must specify the input terminal for a PXIe-4138/PXIe-4139 using the form /Dev1/PXI_Trig0 , where Dev1 is a PXIe-4138/PXIe-4139 and PXI_Trig0 is the terminal.
Note If you specify a channel name when accessing this property, the session must be initialized using the Initialize With Independent Channels VI.

Remarks

The following table lists the characteristics of this property.

Short Name Shutdown Trigger Digital Edge - Input Terminal
Data type cstr.png
Permissions Read/Write
High-level VIs N/A
Channel-based Yes
Instrument-based No
Resettable No