Specifies the resistance level range, in ohms, for the specified channel(s).

The range defines the valid values to which you can set the resistance level.

This property is applicable only if the Output Function property is set to Constant Resistance .

Note The voltage range and current range used by the instrument are automatically determined by the selected resistance level range. For more information, refer to the specifications for your instrument.
Note NI-DCPower uses the terms "source" and "output". However, while sinking with electronic loads and SMUs these correspond to "sinking" and "input", respectively.

For valid ranges, refer to the specifications for your instrument.

Remarks

The following table lists the characteristics of this property.

Short Name Constant Resistance Level Range
Data type cdbl.png
Permissions Read/Write
High-level VIs N/A
Channel-based Yes
Instrument-based No
Resettable No