Configures the voltage limit range for the specified channel(s).

The configured range defines the valid values the voltage limit can be set to using the niDCPower Configure Voltage Limit VI. The voltage limit range setting is applicable only if the channel is set to the DC Current output function using the niDCPower Configure Output Function VI.

Use the Voltage Limit Autorange property to enable automatic selection of the voltage limit range.


icon

Inputs/Outputs

  • civrn.png instrument handle —

    instrument handle identifies a particular instrument session.

  • cstr.png channel name —

    channel name specifies to which channel(s) to apply this configuration value. Specify the channel(s) using the form PXI1Slot3/0,PXI1Slot3/2-3,PXI1Slot4/2-3 or PXI1Slot3/0,PXI1Slot3/2:3,PXI1Slot4/2:3, where PXI1Slot3 and PXI1Slot4 are instrument resource names and 0, 2, and 3 are channels.

    If you do not wire this parameter, all channels in the session are used.

  • cdbl.png voltage limit range —

    voltage limit range specifies the voltage limit range, in volts, on the specified channel(s).

    For valid ranges, refer to the Ranges topics for your device in the NI DC Power Supplies and SMUs Help.

  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • iivrn.png instrument handle out —

    instrument handle out passes the handle used to identify the session in all subsequent NI-DCPower VI calls.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.