NILCRMeasurement Properties
- Updated2024-01-04
- 3 minute(s) read
NILCRMeasurement Properties
The NILCRMeasurement type exposes the following members.
Properties
| Name | Description | |
|---|---|---|
 | ACCurrent |
Measured AC current, in amps RMS.
|
| acInCompliance |
Indicates whether the output was in AC compliance at the time the measurement was taken.
|
| ACVoltage |
Measured AC voltage, in volts RMS.
|
| Cp |
Capacitance, in farads, as measured using a parallel circuit model.
|
| Cs |
Capacitance, in farads, as measured using a series circuit model.
|
| D |
Dissipation factor of the circuit.
|
| dcInCompliance |
Indicates whether the output was in DC compliance at the time the measurement was taken.
|
| Idc |
Measured DC current, in amps.
|
| Lp |
Inductance, in henrys, as measured using a parallel circuit model.
|
| Ls |
Inductance, in henrys, as measured using a series circuit model.
|
| measurementMode |
The measurement mode for the measurement.
|
| Q |
Quality factor of the circuit.
|
| Rp |
Resistance, in ohms, as measured using a parallel circuit model.
|
| Rs |
Resistance, in ohms, as measured using a series circuit model.
|
| stimulusFrequency |
Frequency of the LCR test signal, in Hz.
|
| unbalanced |
Indicates whether the bridge was unbalanced at the time the measurement was taken.
|
| Vdc |
Measured DC voltage, in volts.
|
| Y |
Complex admittance.
|
| YMagnitude |
Magnitude of the complex admittance, in siemens.
|
| YPhase |
Admittance phase angle, in degrees.
|
| Z |
Complex impedance.
|
| ZMagnitude |
Magnitude of the complex impedance, in ohms.
|
| ZPhase |
Impedance phase angle, in degrees.
|