DCPowerOutputSourceCurrent.VoltageLimitHigh Property
- Updated2024-01-04
- 1 minute(s) read
DCPowerOutputSourceCurrentVoltageLimitHigh Property
Gets or sets the voltage limit high for the output to not exceed when generating the desired current level on the specified channels.
Namespace: NationalInstruments.ModularInstruments.NIDCPower
Assembly: NationalInstruments.ModularInstruments.NIDCPower.Fx40 (in NationalInstruments.ModularInstruments.NIDCPower.Fx40.dll) Version: 2023
Syntax
public double VoltageLimitHigh { get; set; }
Public Property VoltageLimitHigh As Double Get Set
Property Value
Type: DoubleThe valid values for this property are defined by the values you specify for the VoltageLimitRange property.
Remarks
The VoltageLimitHigh property is applicable only if the DCPowerSourceOutputFunction property is set to DCCurrent
and the DCPowerComplianceLimitSymmetry property is set to Asymmetric.
The channel must be enabled for the specified voltage limit high to take effect. Refer to the Enabled property for more information about enabling the output channel.
 Note |
|---|
| NI-DCPower uses the terms "source" and "output". However, while sinking with electronic loads and SMUs these correspond to "sinking" and "input", respectively. |