DCPowerOutputLCR.VoltageAmplitude Property
- Updated2024-01-04
- 1 minute(s) read
DCPowerOutputLCRVoltageAmplitude Property
Specifies the amplitude, in V RMS, of the AC voltage test signal applied to the DUT for LCR measurements.
Namespace: NationalInstruments.ModularInstruments.NIDCPower
Assembly: NationalInstruments.ModularInstruments.NIDCPower.Fx40 (in NationalInstruments.ModularInstruments.NIDCPower.Fx40.dll) Version: 2023
Syntax
public double VoltageAmplitude { get; set; }
Public Property VoltageAmplitude As Double Get Set
Property Value
Type: DoubleRMS voltage (volts) for AC stimulus. Valid values: 7.08e-4 V RMS to 7.07 V RMS.
Remarks
This property applies when StimulusFunction is set to ACVoltage.
 Note |
|---|
| This property is not supported by all instruments. Refer to the Supported Properties by Device topic in the NI DC Power Supplies and SMUs Help for information about supported instruments. |
Instrument specifications affect the valid values you can program. Refer to the specifications for your instrument for more information.