DCPowerOutputDigitalEdgePulseTrigger.InputTerminal Property
- Updated2024-01-04
- 2 minute(s) read
DCPowerOutputDigitalEdgePulseTriggerInputTerminal Property
Gets or sets the input terminal for the PulseTrigger.
Namespace: NationalInstruments.ModularInstruments.NIDCPower
Assembly: NationalInstruments.ModularInstruments.NIDCPower.Fx40 (in NationalInstruments.ModularInstruments.NIDCPower.Fx40.dll) Version: 2023
Syntax
public DCPowerDigitalEdgePulseTriggerInputTerminal InputTerminal { get; set; }
Public Property InputTerminal As DCPowerDigitalEdgePulseTriggerInputTerminal Get Set
Property Value
Type: DCPowerDigitalEdgePulseTriggerInputTerminalSpecifies the DCPowerDigitalEdgePulseTriggerInputTerminal value.
Exceptions
| Exception | Condition |
|---|---|
| ObjectDisposedException | The property was accessed after the associated NIDCPower object was disposed. |
| OperationNotSupportedException | The property was accessed to unsupported hardware. |
| SelectorNameException | The property was accessed with an unknown channel name. |
| ArgumentNullException | The property was set with a null input terminal. |
| IviCDriverException | The underlying NI-DCPower driver returned an error. |
Remarks
Use this property only when the Type property is set to DigitalEdge. You can specify any valid input terminal for this property. Valid terminals are listed in Measurement and Automation Explorer under the Device Routes tab or in the documentation for your device.
 Note |
|---|
| This property is not supported by all instruments. Refer to the Supported Properties by Device topic in the NI DC Power Supplies and SMUs Help for information about supported instruments. |
Specify the input terminal using the form /Dev1/PXI_Trig0, where Dev1 is the instrument and PXI_Trig0 is the terminal. The input terminal can also be a terminal from another instrument. For example, you can set the input terminal on Dev1 to be /Dev2/Engine0/SourceCompleteEvent, where Engine0 is channel 0.
| Note |
|---|
| You must specify the input terminal for a PXI-4132 using the form /Dev1/PXI_Trig0, where Dev1 is a PXI-4132 and PXI_Trig0 is the terminal. |
| Note |
|---|
| To use the per-channel version of this property, you must first initialize the session with the NIDCPower(String, Boolean, String) constructor. If the session was initialized with a deprecated constructor, use the per-session version of this property instead or include all channels. |