DCPowerOutputDeviceSpecificLCR.CableLength Property
- Updated2024-01-04
- 2 minute(s) read
DCPowerOutputDeviceSpecificLCRCableLength Property
Specifies how to apply cable compensation data for instruments that support LCR functionality.
Namespace: NationalInstruments.ModularInstruments.NIDCPower
Assembly: NationalInstruments.ModularInstruments.NIDCPower.Fx40 (in NationalInstruments.ModularInstruments.NIDCPower.Fx40.dll) Version: 2023
Syntax
public DCPowerCableLength CableLength { get; set; }
Public Property CableLength As DCPowerCableLength Get Set
Property Value
Type: DCPowerCableLengthThe default value is NI Standard 1M.
Remarks
Supported instruments require cable compensation for the following operations:
- SMU mode: DC current sourcing in the two smallest current ranges
- LCR mode: proper compensation for cabling effects during LCR measurements
 Note |
|---|
| This property is not supported by all instruments. Refer to the Supported Properties by Device topic in the NI DC Power Supplies and SMUs Help for information about supported instruments. |
For NI standard options, select the length of your cable to apply compensation data for a typical cable of that type.
For custom options, choose the source of the custom cable compensation data. You must then generate the custom cable compensation data.