DCPowerMeasurement.ClearLatchedOutputCutoffState Method

public void ClearLatchedOutputCutoffState(
	string channelString,
	DCPowerOutputCutoffReason outputCutoffReason
)

Public Sub ClearLatchedOutputCutoffState ( 
	channelString As String,
	outputCutoffReason As DCPowerOutputCutoffReason
)

Parameters

channelString

Type: SystemString
Specifies the output channels to query. Specify the channel(s) using the form PXI1Slot3/0,PXI1Slot3/2-3,PXI1Slot4/2-3 or PXI1Slot3/0,PXI1Slot3/2:3,PXI1Slot4/2:3, where PXI1Slot3 and PXI1Slot4 are instrument resource names and 0, 2, and 3 are channels. If you do not provide channel(s), all channels in the session are used.

outputCutoffReason

Type: NationalInstruments.ModularInstruments.NIDCPowerDCPowerOutputCutoffReason
Specifies the reasons for which to clear the output cutoff state.

To clear the state for all output cutoff reasons, use OutputCutoffReasonAll.

Note
NI-DCPower uses the terms "source" and "output". However, while sinking with electronic loads and SMUs these correspond to "sinking" and "input", respectively.

Note
This method is not supported by all instruments. Refer to the Supported Functions by Device topic in the NI DC Power Supplies and SMUs Help for information about supported instruments.

Reference