niDCPower_ConfigureSoftwareEdgeStartTriggerWithChannels
- Updated2023-04-15
- 1 minute(s) read
ViStatus niDCPower_ConfigureSoftwareEdgeStartTriggerWithChannels(ViSession vi);
Purpose
Configures the Start trigger for software edge triggering. Use the niDCPower_SendSoftwareEdgeTriggerWithChannels function to assert the trigger condition.
 |
Note This function is not supported on all devices. Refer to Supported Functions by Device for more information about supported devices. |
Parameters
| Input | ||
| Name | Type | Description |
| vi | ViSession | Identifies a particular instrument session. vi is obtained from the niDCPower_InitializeWithIndependentChannels function. |
| channelName | ViConstString | Specifies the channel(s) to use. Specify the channel(s) using the form PXI1Slot3/0,PXI1Slot3/2-3,PXI1Slot4/2-3 or PXI1Slot3/0,PXI1Slot3/2:3,PXI1Slot4/2:3, where PXI1Slot3 and PXI1Slot4 are instrument resource names and 0, 2, and 3 are channels.
If you pass "" for this control, all channels in the session are used. |
Return Value
| Name | Type | Description |
| Status | ViStatus | Reports the status of this operation. To obtain a text description of the status code, call the niDCPower_error_message function. To obtain additional information concerning the error condition, call the niDCPower_GetError function. |