This function is deprecated, use niDCPower_GetLCRCompensationData instead.

Syntax

ViStatus _VI_FUNC niDCPower_GetLCRCustomCableCompensationData(ViSession vi, ViConstString channelName, ViInt32 customCableCompensationDataSize, ViAddr customCableCompensationData)

Remarks

Collects previously generated open and short custom cable compensation data so you can then apply it to LCR measurements with niDCPower_ConfigureLCRCustomCableCompensation.

Call this function after you have obtained open and short custom cable compensation data. Pass the custom cable compensation data to niDCPower_ConfigureLCRCustomCableCompensation.

Note

This function is not supported on all devices. Refer to Supported Functions by Device for more information about supported devices.

Parameters

NameDirectionTypeDescription
vi[in]ViSession

Identifies a particular instrument session. vi is obtained from the niDCPower_InitializeWithIndependentChannels function.

channelName[in]ViConstString

Specifies the channel(s) to use. Specify the channel(s) using the form PXI1Slot3/0,PXI1Slot3/2-3,PXI1Slot4/2-3 or PXI1Slot3/0,PXI1Slot3/2:3,PXI1Slot4/2:3, where PXI1Slot3 and PXI1Slot4 are instrument resource names and 0, 2, and 3 are channels.

If you pass "" for this control, all channels in the session are used.

customCableCompensationDataSize[in]ViInt32

Specifies the size, in bytes, of customCableCompensationData to retrieve. If you enter 0, this function returns the needed size.

customCableCompensationData[out]ViAddr

The open and short custom cable compensation data to retrieve.

Returns

Reports the status of this operation. To obtain a text description of the status code, call niDCPower_error_message. To obtain additional information concerning the error condition, call niDCPower_GetError. The general meaning of the status code is as follows:

Value

Meaning

0

Success

Positive Values

Warnings

Negative Values

Errors