NI-DAQmx .NET Framework 4.0 API Reference

ExternalCalibrationSession.Setup9242 Method

Download PDF

Updated2023-02-21
1 minute(s) read

Reads the specified value from the ADC on the specified physical channel. This method requires a sweep of DAC values obtained from Get9242AdjustmentPoints.

Namespace: NationalInstruments.DAQmx
Assembly: NationalInstruments.DAQmx (in NationalInstruments.DAQmx.dll) Version: 20.7.40.49302

Syntax

public void Setup9242(
	string physicalChannels,
	double adjustmentPoint
)

Public Sub Setup9242 ( 
	physicalChannels As String,
	adjustmentPoint As Double
)

Parameters

physicalChannels: Type: SystemString
Specifies the name of the physical channel(s) to calibrate. The DAQmx physical channel constant lists all physical channels for devices installed in the system.
adjustmentPoint: Type: SystemDouble
The binary number to read from the ADC.

Exceptions

Exception	Condition
DaqException	The NI-DAQmx driver returned an error.

Remarks

Refer to the calibration procedure for your device for detailed calibration instructions.

Note
After you commit the calibration, you cannot undo it. If any calibration settings are incorrect, you must recalibrate the device.

NI-DAQmx .NET Framework 4.0 API Reference

Table of Contents

ExternalCalibrationSession.Setup9242 Method

Syntax

Parameters

Exceptions

Remarks

See Also

Reference

Log in to get a better experience