NI-DAQmx .NET Framework 4.0 API Reference

ExternalCalibrationSession.Setup11637 Method

Download PDF

Sets up external calibration for an FD 11637 device.

Namespace: NationalInstruments.DAQmx
Assembly: NationalInstruments.DAQmx (in NationalInstruments.DAQmx.dll) Version: 20.7.40.49302

public void Setup11637(
	string physicalChannels,
	AIBridgeConfiguration11637 bridgeConfiguration,
	double excitationValue
)

Public Sub Setup11637 ( 
	physicalChannels As String,
	bridgeConfiguration As AIBridgeConfiguration11637,
	excitationValue As Double
)

physicalChannels: Type: SystemString
Specifies the name of the physical channel to use to create the virtual channel. The DAQmx physical channel constant lists all physical channels for devices installed in the system. You cannot specify more than one physical channel.
bridgeConfiguration: Type: NationalInstruments.DAQmxAIBridgeConfiguration11637
The type of Wheatstone bridge the sensor is.
excitationValue: Type: SystemDouble
Specifies the excitation value for the current channel and bridge configuration.

Exception	Condition
DaqException	The NI-DAQmx driver returned an error.

Refer to the calibration procedure for your device for detailed calibration instructions.

Note
After you commit the calibration, you cannot undo it. If any calibration settings are incorrect, you must recalibrate the device.