NI-DAQmx .NET Framework 4.0 API Reference

ExternalCalibrationSession.Setup1142 Method

Download PDF

Configures the gain value for an SCXI-1142 module calibration task.

Namespace: NationalInstruments.DAQmx
Assembly: NationalInstruments.DAQmx (in NationalInstruments.DAQmx.dll) Version: 20.7.40.49302

public void Setup1142(
	string physicalChannels,
	double gain
)

Public Sub Setup1142 ( 
	physicalChannels As String,
	gain As Double
)

Exception	Condition
DaqException	The NI-DAQmx driver returned an error.

You can measure calibration input and output points by supplying reference signals to the specified channel and measuring the outputs.

Note
The terminal on which to measure module output depends on the configuration of the module in MAX. National Instruments recommends cabling the module to the digitizer so that the output appears on the MCH0± pins of the rear signal connector. Refer to the SCXI-1141/1142/1143 User Manual for more information on the routing of module output.