I/O Type:Counter Input:Measurement Types

Indicates the measurement types supported by the physical channels of the device. Refer to CI.MeasTypes for information on specific channels.

Remarks

The following table lists the characteristics of this property.

Short Name	CI.MeasTypes
Data type
Permissions	Read Only
Resettable	False
Settable While Task Is Running	device-specific
Available in Run-Time Engine	True

Count Edges	10125	Count edges of a digital signal.
Frequency	10179	Measure the frequency of a digital signal.
Period	10256	Measure the period of a digital signal.
Pulse Width	10359	Measure the width of a pulse of a digital signal.
Semi Period	10289	Measure the time between state transitions of a digital signal.
Pulse Frequency	15864	Pulse measurement, returning the result as frequency and duty cycle.
Pulse Time	15865	Pulse measurement, returning the result as high time and low time.
Pulse Ticks	15866	Pulse measurement, returning the result as high ticks and low ticks.
Duty Cycle	16070	Measure the duty cycle of a digital signal.
Position:Angular Encoder	10360	Angular position measurement using an angular encoder.
Position:Linear Encoder	10361	Linear position measurement using a linear encoder.
Velocity:Angular Encoder	16078	Angular velocity measurement using an angular encoder.
Velocity:Linear Encoder	16079	Linear velocity measurement using a linear encoder.
Two Edge Separation	10267	Measure time between edges of two digital signals.
GPS Timestamp	10362	Timestamp measurement, synchronizing the counter to a GPS receiver.