Analog Input >> Rosette Strain Gage >> Rosette Measurement Type
- Updated2023-03-16
- 1 minute(s) read
| Data Type: | int32 |
| Description: | Specifies the type of rosette measurement. |
Valid values
| DAQmx_Val_PrincipalStrain1 | 15971 | The maximum tensile strain coplanar to the surface of the material under stress. |
| DAQmx_Val_PrincipalStrain2 | 15972 | The minimum tensile strain coplanar to the surface of the material under stress. |
| DAQmx_Val_PrincipalStrainAngle | 15973 | The angle at which the principal strains of the rosette occur. |
| DAQmx_Val_CartesianStrainX | 15974 | The tensile strain coplanar to the surface of the material under stress in the X coordinate direction. |
| DAQmx_Val_CartesianStrainY | 15975 | The tensile strain coplanar to the surface of the material under stress in the Y coordinate direction. |
| DAQmx_Val_CartesianShearStrainXY | 15976 | The tensile strain coplanar to the surface of the material under stress in the XY coordinate direction. |
| DAQmx_Val_MaxShearStrain | 15977 | The maximum strain coplanar to the cross section of the material under stress. |
| DAQmx_Val_MaxShearStrainAngle | 15978 | The angle at which the maximum shear strain of the rosette occurs. |
You can get/set/reset this property using:
DAQmxGetAIRosetteStrainGageRosetteMeasType
DAQmxSetAIRosetteStrainGageRosetteMeasType
DAQmxResetAIRosetteStrainGageRosetteMeasType