Analog Input >> General Properties >> Signal Conditioning >> Excitation >> Value
- Updated2023-03-16
- 1 minute(s) read
| Data Type: | float64 |
| Description: | Specifies the amount of excitation that the sensor requires. If Voltage or Current is DAQmx_Val_Voltage, this value is in volts. If Voltage or Current is DAQmx_Val_Current, this value is in amperes. |
You can get/set/reset this property using:
DAQmxGetAIExcitVal
DAQmxSetAIExcitVal
DAQmxResetAIExcitVal