FPGA I/O Node

Use an FPGA I/O Node configured for reading and writing with this device.

Terminals in Software

Use the FPGA I/O Node to access the following terminals for this device.

Table 375. Terminals in Software
Terminal Description
DIx Digital input channel x, where x is the number of the channel. The NI 9375 has DI channels 0 to 15.
DI7:0 Digital port consisting of DI channels 0 through 7. Channel 7 is returned in the MSB, and channel 0 is returned in the LSB.
DI15:8 Digital port consisting of DI channels 8 through 15. Channel 15 is returned in the MSB, and channel 8 is returned in the LSB.
DI15:0 Digital port consisting of DI channels 0 through 15. Channel 15 is returned in the MSB, and channel 0 is returned in the LSB.
DOx Digital output channel x, where x is the number of the channel. The NI 9375 has DO channels 0 to 15.
DO7:0 Digital port consisting of DO channels 0 through 7. Channel 7 is returned in the MSB, and channel 0 is returned in the LSB.
DO15:8 Digital port consisting of DO channels 8 through 15. Channel 15 is returned in the MSB, and channel 8 is returned in the LSB.
DO15:0 Digital port consisting of DO channels 0 through 15. Channel 15 is returned in the MSB, and channel 0 is returned in the LSB.
Caution DI and DO operations that are run concurrently may exhibit jitter. Access both subsystems using a single I/O Node to avoid jitter in your application. Refer to Avoiding Timing Uncertainty for more information.

Arbitration

This device supports only the Arbitrate if Multiple Requestors Only option for arbitration. You cannot configure arbitration settings for this device.

I/O Methods

This device does not support any I/O methods.

Module Methods

This device does not support any module methods.

I/O Properties

This device does not support any I/O properties.

Module Properties

Use the FPGA I/O Property Node to access the following module properties for this device.

Property Description
Module ID Returns the module ID.
Serial Number Returns the unique serial number of the module.
Vendor ID Returns the NI vendor ID, 0x1093.

Single-Cycle Timed Loop

This device does not support the single-cycle Timed Loop.