Module I/O Variables

To use I/O from this module in a VI, drag and drop I/O variables from the Project Explorer window to the block diagram of the VI.

The I/O variables for the channels read and write Boolean values.

Module Channels

The NI 9344 has the following channels.

Table 370. Module Channels
Channel Description
User LEDx LED output channel x, where x is the number of the channel. The NI 9344 has LED channels 0 to 3.
User Switch x Switch input channel x, where x is the number of the channel. The NI 9344 has Switch channels 0 to 3.

C Series Module Properties Dialog Box

Use this dialog box to configure the module. Right-click the module in the Project Explorer window and select Properties to display this dialog box. You can configure the following options.

  • Name—Specifies the name of the C Series module, which appears in the Project Explorer window. LabVIEW assigns a default name to the module based on the slot number. You can use this field to give the module a descriptive name.
  • Module Type—Specifies the type of C Series module. You cannot change this value.
  • Location—Specifies a slot in the chassis for the C Series module.