Module I/O Variables

To use I/O from this module in a VI, drag and drop I/O variables from the Project Explorer window to the block diagram of the VI. The I/O variables write floating-point values to the channels in volts.

Module Channels

The NI 9269 has the following channels.

Table 325. Module Channels
Channel Description
AOx Analog output channel x, where x is the number of the channel. For the NI 9269, x is 0 to 3.

Module-Specific Errors

The NI 9269 can return the following module-specific errors.

Table 326. Module-Specific Errors
Error Code Description
65548 One or more channels are in overcurrent or overvoltage protection mode. Check the terminals for any fault condition that could be causing an out-of-range voltage or current on the channels.
65579 The module is in overcurrent protection mode. Check the terminals for any fault condition that could be causing an out-of-range current.

C Series Module Properties Dialog Box

Use this dialog box to configure the module. Right-click the module in the Project Explorer window and select Properties to display this dialog box. You can configure the following options.

  • Name—Specifies the name of the C Series module, which appears in the Project Explorer window. LabVIEW assigns a default name to the module based on the slot number. You can use this field to give the module a descriptive name.
  • Module Type—Specifies the type of C Series module. You cannot change this value.
  • Location—Specifies a slot in the chassis for the C Series module.